Bambu Lab Bambu PLA Pure Milky Pink, Spool (1.000 g)

The Bambu Lab PLA Pure Filament takes a particularly purist approach: as few components as possible, and each one documented and tested according to EU standards. The filament is made up of a total of five components, from the base material to the pigment, each of which is tested individually:

• PLA made from natural corn and sugar cane,
• acrylic copolymer,
• colour pigments,
• ethylene bis-stearamide (EBS),
• asbestos-free talc.

While standard filaments are usually tested only as finished end products, Bambu Lab goes one step further by providing the relevant documentation* for each raw material.

*Note: The certifications mentioned refer to the raw materials used, not to the finished printed part.

Fewer additives do not mean lower performance. PLA Pure achieves the mechanical properties of Bambu PLA Basic and delivers layer adhesion on a par with common PLA filaments. A pared-down material composition meets the familiar Bambu Lab standard for strength and processing.

Even without pre-drying, PLA Pure displays significantly less stringing than typical PLA filaments from third-party suppliers. The result is cleaner surfaces, less post-processing and a more reliable print overall.

► All relevant print parameters are stored directly on the spool’s RFID chip and are automatically read by the Bambu Lab AMS.

UL GREENGUARD 2904 certified

PLA Pure is certified under UL GREENGUARD 2904, which is the recognised standard for emissions from 3D printers. This certification makes the filament especially suitable for use in environments where printing is carried out regularly.