2 English reviews written for Extrudr TPU medium Black
13 customer reviews in all languages
| 5 stars | | 18 | (66%) |
|---|---|---|---|
| 4 stars | | 7 | (25%) |
| 3 stars | | 0 | (0%) |
| 2 stars | | 2 | (7%) |
| 1 Stars | | 0 | (0%) |
Filter reviews:
-
Pete, UK
09 July 2023
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. Was this rating helpful? (3) (0)
-
JCE
17 May 2021
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. Rated with 5 out of 5 stars.
Prusa mini settings
Used the following settings on a Prusa mini+ with BondTech extruder:
- No overextrusion
- Print Speed: Maximum 20-30mm/s
- Heatbed: 50ºC
- Nozzle: 210ºC (First Layer: 220ºC !)
The filemant starts to clog the nozzle below 200ºC. Above 220ºC the surfaces became slightly speckled. Extrudr recommends nozzle temperatures between 230-250ºC which was to high in my opinion. 3DJake recommends values below 230ºC. The filament is also printable on the Prusa mini without the BondTech modification, but you might have to increase the temperature above 220ºC to decrease the viscosity of the filament.Was this rating helpful? (4) (0)
Magazine Articles:
Discover 3DJake:
-
Switzerland: Free standard delivery from CHF 69.90
-
Delivery in 3 business days.
More than 10.600 products
We deliver worldwide to
more than 40 countries
Rated with 4 out of 5 stars.
Flexible filament
Nice product, easy to print on my Qidi printers. X-Max and X-Plus, both series 2 machines with direct drives. I needed to make some splash proof covers so was important to me to close up as many gaps in the printing process as possible, hence i set my print to over extrude. Print slow seems key.
My main settings:
Print temp: 240c
Bed temp: 55c
Top/bottom walls flow 110%
Infill flow: 110%
Infill density 100%
Retraction distance: 1mm
Retraction speed: 20mm/sec
Print speed: 30mm/sec ( i tried 40mm/sec and got extruder drive jams)
Initial layer print speed: 15mm/sec
Initial layer travel speed 70mm/sec
Good product.