3DLac First Layer Bundle, 1 Set
Set including adhesive & print bed cleaner in a set for the perfect first layer
CHF 15.80 CHF 17.56 -10%
(All prices incl. VAT.
- Spray adhesive + print bed cleaner
- Improved adhesion
- Clean print bed surface
-
-
-
-
3DLac
3D NYLON
Durable adhesive specifically designed for use with nylon filaments
CHF 22.00(CHF 733.33 / l) -
3DLac
CLEAN3D 3D Print Bed Surface Cleaner Spray
Isopropanol cleaner for 3D printing beds that dries quickly without leaving any residue
CHF 9.50(CHF 23.75 / l) -
3DLac
First Layer Bundle
Set including adhesive & print bed cleaner in a set for the perfect first layer
CHF 15.80 CHF 17.56
Related products
Description
The first layer can make the difference between a successful print and a tangled mess of filament on the bed an hour later. The 3DLac First Layer Bundle helps you get off to a good start: clean your print bed with CLEAN3D spray cleaner, then apply 3DLac spray adhesive to hold your model securely in place. You’re ready to print.
► Adhesive residue, fingerprints and grease build up on every print bed over time. These can affect adhesion when your first layer suddenly stops behaving as expected. Simply spray the surface with CLEAN3D Print Bed Cleaner and wipe it down for a fresh, clean base.
► Next, apply 3DLac Spray Adhesive, a firm favourite among makers for years. A light mist helps your model stay securely attached, even when printing materials prone to warping. The adhesive withstands high temperatures, works with all common filaments and contains no added fragrance. Your workshop can carry on smelling like a workshop.
► Start your print. Once it’s finished, clean the bed again with CLEAN3D, ready for your next project.
This set includes:
-
Spray Adhesive from 3DLac
For perfect adhesion to the printing bed
Content: 400 ml
- Suitable for all materials
- Without perfume
- Resistant to elevated temperatures
- Strong fixing agent
-
CLEAN3D 3D Print Bed Surface Cleaner Spray from 3DLac
Isopropanol cleaner for 3D printing beds that dries quickly without leaving any residue
Content: 400 ml
- For FDM/FFF print beds
- Removes adhesive residue and grease
- Evaporates without leaving any residue
- Easy to use
Hazard and precautionary statements
Spray Adhesive
Signal word: Danger
Precautionary statements:
- P101 - If medical advice is needed, have product container or label at hand.
- P102 - Keep out of reach of children.
- P210 - Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
- P211 - Do not spray on an open flame or other ignition source.
- P251 - Do not pierce or burn, even after use.
- P264 - Wash thoroughly with plenty of water after use.
- P280 - Wear protective gloves/protective clothing/eye protection/face protection.
- P305+P351+P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P410+P412 - Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
- P501 - Dispose of contents/container according to local/national regulations.
Hazard statements:
- H222 - Extremely flammable aerosol
- H229 - Pressurized container: may burst if heated
- H319 - Causes serious eye irritation
- H336 - May cause drowsiness or dizziness
CLEAN3D 3D Print Bed Surface Cleaner Spray
Signal word: Danger
Precautionary statements:
- P101 - If medical advice is needed, have product container or label at hand.
- P102 - Keep out of reach of children.
- P103 - Read label before use.
- P210 - Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
- P261 - Avoid breathing dust/fume/gas/mist/vapours/spray.
- P271 - Use only outdoors or in a well-ventilated area.
- P501 - Dispose of contents/container according to local/national regulations.
Hazard statements:
- H225 - Highly flammable liquid and vapour
- H319 - Causes serious eye irritation
- H336 - May cause drowsiness or dizziness
Legal guarantee & manufacturer details
More information: https://europa.eu/youreurope/guarantees
Similar products
Questions & Answers about 3DLac First Layer Bundle
Customer Reviews
English reviews written for 3DLac First Layer Bundle
Magazine Articles:
-
Switzerland: Free standard delivery from CHF 69.90
-
Delivery in 3 business days.
More than 11.550 products
We deliver worldwide to
more than 40 countries
