FabConstruct 3D Scanner Matting Spray

Prepare objects for the 3D scan

Scanning reflective, glossy or very dark is a problem for many 3D scanners. Therefore it is recommended to edit the model before the scan.

Due to the fine-grained structure of the spray, a uniform layer with minimal thickness is sprayed onto the model. The 3D matting spray is glare-free and easy to remove.

By treating the model with the spray, a white topcoat is created.

It is recommended to spray a thin layer from a distance of about 20 - 30cm.

Suitable for fine detail scanning

Due to the small particle size, fine surface details smaller than 0.2mm are not lost. The coating can be easily washed off with water and a brush.

WARNINGS

Do not inhale the spray! Use the spray only outdoors and / or use respiratory protection (fine dust).
The spray can attack very sensitive materials or settle in rough surfaces. The possibility of a lasting change (eg. fading) of the surface can not be excluded! Therefore, first test the spraying and removal on small spots or test objects.