E3D Hemera XS Direct V6, 12V

The Hemera XS Direct Kit from E3D is a compact 1.75 mm dual-drive extrusion system, which is 92 g lighter and 11 mm shorter compared to the classic Hemera! The extruder is equipped with a special stepping motor. This ensures that the Hemera XS moves with less inertia and is faster, producing high-quality prints. Its compact size makes it ideal for use in smaller printers as it doesn't take up as much space.

Upgradable for all needs of the E3D ecosystem

Hemera XS optimally adapts to all performance requirements of the entire E3D ecosystem! You can print PLA with a standard V6 heater block, or crank up the power to print carbon fibre reinforced PEEK with the SuperVolcano HeaterBlock and NozzleX.

Flat T-slot mounting

Hemera XS features a custom T-slot mounting system. This allows the assembly and attachment of various accessories.

High compatibility

Hemera XS is compatible with V6, Volcano and SuperVolcano nozzles and heater blocks.

Note: While the Hemera XS's custom motor may appear to be a NEMA 17 stepper motor, it is not one of its standard counterparts. So Hemera XS is not compatible with NEMA 17 motors, nor is it interchangeable with third-party motors.

Included:

• 1 x 12V or 24V 30W cartridge heater
• 1 x Thermistor Cartridge
• 1 x Molex Cable
• 1 x 40 x 40 x 10mm 12V or 24V fan
• 1 x Cable tie
• 1 x E3D Hemera Sink
• 1 x Idler
• 1 x Idler slide block
• 1 x Idler Spring block
• 1 x Thumbwheel
• 1 x Idler shaft
• 1 x Drive Hob
• 1 x Idle gear hob
• 1 x V6 Heater Block
• 1 x E3D Hemera XS Motor
• 1 x Motor Cable
• 1 x E3D Hemera Fixing Kit
• 1 x V6 Fixing Kit
• 1 x E3D Hemera Heat Break
• 1 x Brass 1.75mm 0.4mm Nozzle
• 1 x V6 Sock
• 1 x Thermal Paste

You can find more useful information about this extrusion system here.