🔥 New Products - 3DJake - (CH) - englisch

presto Metal Filler

2026-04-23T22:00:00+00:00

presto Metal Filler is a two-component polyester metal filler with special fillers and aluminium pigments, ideal for large-scale repair work. Thanks to its high thixotropy, the material can be applied particularly evenly, pore-free, and in variable layer thicknesses. The filler adheres reliably to metal, wood, concrete, and various plastics, making it perfect for filling holes, levelling out uneven surfaces, and stabilising thin material areas. Due to its elasticity and excellent sandability, it is highly versatile for use in the automotive sector, mechanical engineering, as well as workshop and hobby projects. ► Recommended Use: The surface must be clean, dry, free of grease, and sanded; any rust must be removed beforehand. Thoroughly mix the required amount of filler with the correct amount of hardener (e.g., a walnut-sized amount of filler with a pea-sized amount of hardener). Apply the material in the desired layer thickness. After approximately 30–40 minutes, the surface can be further processed, e.g., by sanding, drilling, or painting. Tools should be cleaned immediately after use; mixed material must not be returned to the tin. Technical Specifications: Base Polyester resin with mineral fillers Colour Grey Form Pasty, soft, thixotropic Working time (20 °C) Approx. 7-8 min Processing temperature From 12 °C Drying (20 °C, 50% relative humidity) Sandable after approx. 30-40 min Flashpoint Approx. 33 °C Density (20 °C) 1.85 g/cm³ Hardener addition 2-4 % Temperature resistance of cured material 120 °C

Nobufil PETG GF Industrial Turquoise

2026-04-23T22:00:00+00:00

nobufil PETG GF is a 10% glass-fibre reinforced PETG filament manufactured from recycled European industrial waste. The addition of glass fibres gives the material significantly higher stiffness, strength, and dimensional stability, making it ideal for technical and mechanically stressed components. Compared to standard PETG, PETG GF offers improved dimensional stability and temperature resistance while maintaining the typical ease of printing associated with PETG. The filament prints with virtually no warping, is low-odour, and works reliably on most common 3D printers. Thanks to its high resistance to chemicals, moisture, oils, and lubricants, the material is particularly suitable for applications in mechanical engineering, functional components, or outdoor use. Typical areas of application include gear components, brackets, housings, or tool attachments. Note: A hardened nozzle is required for printing nobufil PETG GF filaments. ► Key features of nobufil PETG GF at a glance: PETG filament with 10% glass fibre reinforcement Manufactured from recycled European industrial waste High stiffness and dimensional stability for technical applications Improved temperature resistance Excellent chemical resistance (oils, coolants, lubricants) Low warping and virtually distortion-free printing Easy to print, even without an enclosed build chamber High wear resistance Matte, technical surface finish Low-odour during the printing process

presto Spray Adhesive

2026-04-23T22:00:00+00:00

presto Spray Adhesive is a high-performance contact adhesive based on synthetic rubbers, suitable for both permanent and temporary bonds. Thanks to the adjustable spray valve, the application amount can be precisely metered, while the uniform spray pattern ensures a clean and controlled application. The adhesive dries quickly and provides reliable adhesion on a wide variety of materials such as carpet, cork, rubber, foam rubber, paper, cardboard, textiles, leather, metal, wood, as well as many plastics and films. With a spray pattern width of approximately 10 cm, the product is suitable for both large-surface and targeted applications. ► Application Recommendation: For optimal results, application should take place between 5 and 30 °C. The substrate must be clean, dry, and free of grease. Depending on the application, the adhesive can be applied to one side for temporary adhesion or to both sides for permanent bonds. The short flash-off time allows for quick further processing, while subsequent firm pressing ensures a stable connection. Key features of presto Spray Adhesive at a glance: Transparent contact adhesive based on synthetic rubbers Suitable for permanent and temporary bonds Quick-drying and reliable Adjustable spray valve for metered application Uniform spray pattern (~10 cm) Suitable for numerous materials: carpet, cork, rubber, foam rubber, paper, cardboard, textiles, leather, metal, wood, many plastics, and films Easy to use Technical Specifications: Base Synthetic resin Colour White-transparent Specific gravity (20 °C) 0.75 g/ml Discharge rate 1.2 g/s Vapour pressure (20 °C) 3-4 bar Heat resistance Up to 80 °C Drying (20 °C, 50% relative humidity) Drying time: 2-5 min Open time: max. 45 min

Nobufil PETG GF Lime Green

2026-04-23T22:00:00+00:00

Nobufil PETG GF Industrial Teal

2026-04-23T22:00:00+00:00

presto Cut & Drill Oil

2026-04-23T22:00:00+00:00

presto Cut & Drill Oil is a high-quality lubricant and cooling spray specifically developed to reduce friction during machining processes. It provides effective cooling for tools and prevents overheating during drilling, turning, milling, cutting, or sawing. The lubricating effect significantly reduces tool wear and tear, leading to a longer service life and more consistent machining results. The oil is non-corrosive and silicone-free, making it suitable for a wide range of applications. ► Application Recommendation: Shake the can well for approximately 2 minutes at room temperature. Spray the tool and material generously before processing. During the work process, the area being machined should remain continuously wetted to ensure optimal cooling and lubricating properties. The recommended processing temperature is between 5 and 30 °C. Technical Specifications: Base Mineral oil Colour Transparent, slightly brownish Specific gravity (20 °C) 0.85 g/ml Discharge rate 1.77 g/s Vapour pressure (20 °C) 3-4 bar

Dupli-Color Silicone Remover

2026-04-23T22:00:00+00:00

ColorMatic Silicone Remover is an essential cleaning agent for professional painting and lacquering tasks. It reliably removes silicone, grease, oil, wax, dirt, tar, and adhesive residues, ensuring optimally prepared surfaces. Through thorough cleaning, the adhesion of subsequent paint layers is significantly improved. Thanks to its quick and easy application, this silicone remover is ideal for spot repairs, partial painting, and any work where a clean surface is critical. The mild, non-aggressive solvents used allow for effective cleaning while remaining gentle on the material. ColorMatic Silicone Remover can be used on metal, glass, primed, filled, and puttied surfaces, as well as on both painted and unpainted substrates. ► Directions for use: Please shake the can briefly before use. Apply 1–2 light coats to the surface to be cleaned and repeat the process if necessary. Then, wipe off with a clean, dry cloth or fleece and allow the surface to degas/evaporate thoroughly. Technical Specifications: Colour Transparent Coverage Highly economical Surfaces Puttied, primed, and filled surfaces; metal; glass; old and factory coatings; painted & unpainted substrates

Bambu Lab X2D Combo

2026-04-14T22:00:00+00:00

The Bambu Lab X2D 3D printer represents the next evolutionary step in the Bambu Lab X-series, specifically engineered for high-precision multi-material 3D printing with support structures. Featuring a dual-extruder system, an actively heated enclosed build chamber, and intelligent sensor technology, the X2D is designed for printing high-quality functional parts, complex geometries, and flawless support interfaces. Combined with the AMS 2 Pro, the X2D also enables automated multi-material and multi-colour 3D printing with intelligent filament switching and integrated drying. ► Bambu Lab X2D 3D Printer Dual-Extruder System with Mechanical Nozzle Switching At the heart of the system is a dual-nozzle setup with a mechanical switching mechanism that operates without the need for an additional motor in the toolhead. Instead, a gear and ratchet mechanism handles the nozzle swap, reducing toolhead mass and minimising vibrations at high speeds. The combination of two extrusion systems is specially designed for maximum efficiency: Direct Drive (Left Nozzle): Short filament path for precision model printing. Bowden (Right Nozzle): Optimised for support materials. This architecture allows for simultaneous printing of model and support structures using different materials, resulting in superior surface finishes and supports that can be cleanly removed. Furthermore, the X2D's dual-extrusion system reduces overall filament waste significantly. Tip: The Bambu Lab X2D supports all common support material combinations. For example, PLA can be combined with PETG or PVA supports, while PETG can be used with PLA, or TPU with PLA. For technical materials like PA6-CF or PET-CF, ABS or ASA can be utilised as support materials. Dynamic Flow Calibration for Consistent Print Quality The Bambu Lab X2D automatically manages key calibration and monitoring processes (extruder, hotend, nozzle, and filament). Before every print, the system performs a self-calibration and monitors the entire process via a vast array of sensors. A high-precision proprietary PMSM motor captures 20,000 data points per second, allowing it to detect deviations and potential clogs early on. If potential errors are identified, the printing process is paused before quality issues can occur. Heated Build Chamber for Technical Materials The fully enclosed design with active chamber heating up to 65 °C enables reliable printing of engineering-grade materials such as ABS, ASA, or Nylon, while "Cool Mode" provides optimal conditions for PLA and standard filaments. With a maximum nozzle temperature of up to 300 °C, the X2D covers a broad spectrum of materials. Two thermal modes for the build chamber: Cool Mode: Active cooling via external air circulation for heat dissipation; optimal for standard materials like PLA and PETG. Heat Mode: Actively heated build chamber up to 65 °C combined with nozzle temperatures up to 300 °C; suitable for technical materials like ABS, ASA, or Nylon. Precision, Stability, and Quiet Operation Up to 31 integrated sensors ensure that the entire printing process is monitored - from material flow and temperature to safety-critical parameters. *The Vision Encoder is available separately as an option. This monitors belt tension and mechanical deviations continuously, and compensates for them in real-time. This maintains a motion accuracy of up to 50 µm across the entire build volume. Optimised for Professional Support Workflows The X2D is specifically tailored for model-and-support combinations. While traditional dual-material printing is possible, the system architecture reaches its full potential when combining materials used for the model with dedicated support filaments. ► Bambu Lab AMS 2 Pro Multi-Material System The Bambu Lab AMS 2 Pro is an advanced multi-material system that combines automated filament management, rapid material switching, and integrated drying. It automatically recognises the loaded filament, switches between materials independently, and ensures optimal conditions throughout the printing process. With a capacity for up to 4 filament spools simultaneously, the AMS 2 Pro offers maximum flexibility for multi-colour and multi-material 3D printing. By expanding with up to 4 AMS 2 Pro units and 8 AMS HT modules, you can manage up to 24 filaments in parallel. The integrated high-performance servo motor enables filament changes that are up to 60% faster, reducing overall print times and optimising workflows. A standout feature is the integrated filament drying, which handles up to four spools at once. An automatic system with an electromagnetic air valve regulates internal humidity, while rotating spools ensure uniform drying. This results in consistent material properties and stable print quality, even with moisture-sensitive filaments. Please note: The filaments shown in the AMS 2 Pro photo are NOT included in the delivery! Bambu Lab X2D 3D Printer Features at a Glance: Dual-extruder 3D printer with both Direct Drive and Bowden systems. Build volume (Single Nozzle): 256 x 256 x 260 mm. Build volume (Dual Nozzle): 235.5 x 256 x 256 mm. Dual Printheads: Direct Drive for model materials, Bowden for support material. Mechanical dual-nozzle switching mechanism without an auxiliary motor. Tool-free "Quick-Swap" nozzle replacement. Reduced mass for higher print speeds and stability. Dynamic Flow Calibration with real-time monitoring. AI monitoring of the build plate. Auto Hole and Contour Compensation. Optimised for professional support material printing. Enclosed, actively heated build chamber up to 65 °C. Compatible with PLA, PETG, ABS, ASA, Nylon, and more. 3-stage air filtration: G3 Pre-filter + H12 HEPA filter + Activated Carbon for reduced odours and VOCs. Quiet operation; under 50 dB in Silent Mode. Fully integrated into the Bambu Lab ecosystem (Bambu Studio, Bambu Handy, MakerWorld, Maker's Supply, maker's Lab, etc.). Suitable for professional and technical applications. Technical specifications: ► Bambu Lab X2D 3D printer: Printer Dimensions 392 x 406 x 478 mm Net Weight 16.25 kg Build Volume Main Nozzle Printing: 256 x 256 x 260mm Auxiliary Nozzle Printing: 235.5 x 256 x 256 mm Dual Nozzle Printing: 235.5 x 256 x 256 mm Total volume: 256 x 256 x 260 mm Hotend 0.4 mm nozzle made of hardened steel, with built-in filament cutter Extruder Direct Drive (Main - left) + Bowden (Auxiliary - right) Compatible Filament Diameter 1.75 mm Max. Printing Temperature 300 °C Max. Printing Speed 1000 mm/s Max. Build Plate Temperature 120 °C Max. Acceleration 20,000 mm/s² Max. Flow Rate 40 mm³/s Chamber heating active, up to 65 °C Air purification G3 pre-filter + H12 HEPA filter + activated carbon Supported Build Plates Bambu Textured PEI Plate, Bambu Cool Plate, Bambu Engineering Plate, Bambu High Temperature Plate, Bambu Smooth PEI Main Control Board Fan Closed Loop Chamber Heat Circulation Fan Auxiliary Part Cooling Fan Part Cooling Fan Hotend fan External Exhaust Fan Supported Materials PLA (except PLA Aero), PETG, ABS, ASA, TPU for AMS, support for PLA, support for PLA/PETG, support for ABS, support for PA/PET, PET, PA, PC, PVA, glass fibre, and carbon-filled PLA, PETG, ABS, ASA, PA6, PAHT, PET Chamber Camera 1920 x 1080 pixels Device Display 5-inch touchscreen, 1280 x 720 pixels Control Interface Touchscreen, mobile app, PC Connectivity WiFi Storage 8 GB eMMC, USB port Voltage High-voltage version: 200-240 VAC, 50/60 Hz Low-voltage version: 100-120 VAC, 50/60 Hz Max. Power High-voltage version: 1600 W @ 220 V Low-voltage version: 1100 W @ 110 V Operating Temperature 10-30 °C Supported Operating Systems macOS, Windows, Linux Supported Slicers Bambu Studio and third-party slicers that support G-code (some features may be limited) ► Bambu Lab AMS 2 Pro: Dimensions 372 x 280 x 226 mm Weight 2500 g Material ABS/PC Supported Materials for Printing PLA, PETG, ABS, ASA, PET, PA, PC, PVA (dry), BVOH (dry), PP, POM, HIPS → Standard materials PLA-CF/ PAHT-CF/ PETG-CF/Support for PLA/PETG/TPU for AMS → Bambu Lab Not Supported Materials for Printing TPE, TPU, PVA (wet), BVOH (wet), CF, GF → Standard materials PET-CF/ TPU 95A → Bambu Lab Supported Materials for Drying PLA, PETG, Support for PLA/PETG, ABS*, ASA*, PET*, PA*, PC*, PVA*, BVOH *, PP, POM*, HIPS* → Standard materials PLA-CF*/ PAHT-CF*/ PETG-CF*, and TPU for AMS*→ Bambu Lab Maximum Drying Temperature 65 °C Drying Features Active moisture dissipation, Temperature and humidity detection, closed storage Filament Diameter 1.75 mm Supported Spools Width: 50–68 mm Diameter: 197–202 mm *These filaments require a higher temperature for drying, and the AMS 2 Pro may not dry them completely.

3DMakerpro Fox

2026-04-30T22:00:00+00:00

The 3DMakerpro Fox 3D scanner brings professional scanning quality into a setup that is intuitive and ready to use immediately. With an accuracy of 0.07 mm and a resolution of 0.10 mm, the scanner captures even the finest details. Perfect for 3D printing, reverse engineering, or modelling, the Fox delivers clean, usable scans without needing complicated preparation. Precision You Can Actually Use With its high degree of accuracy, the Fox reliably captures fine structures, edges, and surfaces. The result: highly detailed models that can be processed or printed directly. Stress-Free Scanning The combination of the Fox hardware and JMStudio software handles the difficult steps for you. You get a live 3D preview during the scan, allowing you to see immediately if everything is aligned correctly. Live point cloud in real-time Distance and tracking display Guided onboarding for beginners No More Tracking Issues If you slip or move too quickly, it's no problem. The integrated AI recognition finds your object again immediately and continues the scan seamlessly without needing a restart. Finished Models with Just One Click After the scan, the software takes care of the rest: Automatic alignment of the point cloud One-click processing (fusion, cleaning, optimisation) Export as STL, OBJ, PLY, or ASC You receive a print-ready model directly, without the need for extensive post-processing. Less Preparation Required Thanks to modern NIR technology, the Fox scans many surfaces without the need for scanning spray. This even applies to dark and matte materials. Just Plug and Play No calibration, no setup stress: connect the scanner, open the software, and you'll be ready to go in less than 10 minutes. Key Features of the 3DMakerpro Fox 3D Scanner at a Glance: 0.07 mm accuracy & 0.10 mm resolution Live scan with real-time preview AI tracking with automatic re-lock One-click processing for finished models Supports STL, OBJ, PLY, and ASC NIR technology for less scanning spray Ideal for both beginners and advanced users Fast start without calibration Note: No internet connection is required for scanning or processing. All data is stored locally. An internet connection is only needed for login, updates, or data transfer. Alternatively, you can use the scanner offline in Guest Mode. Included in the Delivery: 1 x 3DMakerpro Fox 3D Scanner 1 x Manual Turntable 1 x Power Adapter (65 Watt) 1 x USB Cable Technical Specifications: Dimensions 115 x 70 x 35 mm Weight 210 g Accuracy 0.07 mm Resolution 0.10 mm Single Capture Range 200 x 100 mm Object Size ~ 40-1200 mm Frame Rate 10 fps Light Source NIR Color Texture Mono Textures Working Distance 150-400 mm Interface USB 2.0 Output Formats (Slicer) OBJ, STL, PLY, ASC Supported Operating Systems Windows 10/11 (64-bit), macOS 12/13 Minimum PC Requirements i5 8th gen, 16 GB RAM, MX250 2 GB Recommended PC Requirements i7 8th gen, 16 GB RAM, RTX 3060 4 GB

3DMakerpro Raven

2026-04-13T22:00:00+00:00

The 3DMakerpro Raven is a high-performance, handheld LiDAR scanner specifically engineered for rapid and precise capturing of large-scale environments. With a range of up to 50 metres and a compact, portable design, it is the ideal choice for applications in architecture, surveying, construction, and 3D digitisation. Precision Scanning with Advanced SLAM By fusing point cloud, image, IMU, and GPS data, the enhanced SLAM system ensures highly accurate scan alignment. Motion-induced distortions are significantly reduced, resulting in stable and precise 3D data sets. Extended Range in a Compact Form With an effective scanning range of 40–50 metres, the Raven effortlessly captures expansive scenes such as stadiums, caves, or urban environments with a single manageable device weighing just approximately 1100 g. 360° Capture for Maximum Coverage The 360° x 40° field of view minimises blind spots, allowing for comprehensive data acquisition in a single pass. High-Resolution Colour Acquisition The integrated 12 MP camera system automatically adjusts to varying lighting conditions to deliver high-resolution imagery. This data is utilised to generate realistic RGB point clouds and Gaussian splatting data. Expandable Visual Capture For complex workflows, Raven supports the integration of external camera systems, allowing for further enhancements in image quality and field of view. Uninterrupted Operation The replaceable batteries provide up to 2 hours of runtime and can be quickly swapped out - perfect for long-duration scanning projects without downtime. Optimised Workflow with RayStudio RayStudio software covers the entire workflow: from data acquisition and processing to analysis and export, making the process both efficient and precise. In the Box: ► Raven Standard: 1 x Raven LiDAR Scanner 1 x Battery Grip 1 x Mounting Base 1 x Protective Sleeve 1 x 128 GB TF Card ► Raven Max: 1 x Raven Max LiDAR Scanner 1 x Battery Grip 1 x Mounting Base 1 x Protective Sleeve 1 x 128 GB TF Card ► Raven Max RTK: 1 x Raven Max LiDAR Scanner 1 x RTK Kit 1 x Battery Grip 1 x Mounting Base 1 x Protective Sleeve 1 x TF Card Reader 1 x 128 GB TF Card 1 x Carrying Case Technical Specifications: Dimensions 148 x 288 x 98 mm Weight 1100 g Sensor Size 1/2 inch Camera Raven: 1 x 12 MP Camera Raven Max/Max RTK: 2 x 12 MP Camera Light Source 905 nm (Class 1) Accuracy 2 cm at 10 metres 3 cm at 20 metres 5 cm at 40 metres Scan Angle Horizontal 360° Vertical 40° Scan Range 80–100 m Point Cloud Frequency 150,000 points/sec Processor 8-core CPU, 2.4 GHz Storage / Internal Memory 32 GB Display 3.9-inch AMOLED Battery 12,000 mAh rechargeable battery Connectivity Wi-Fi 5 Interface USB Type-C Supported Operating System Windows 11+

Elegoo Jupiter 2

2026-04-15T22:00:00+00:00

The Jupiter 2 by Elegoo is a large-format resin 3D printer designed for ambitious makers and professionals. Featuring state-of-the-art 16K technology, automatic calibration, and intelligent resin management, it is designed to deliver high-precision and reliable large-scale prints. 16K precision for the finest details Equipped with a 14-inch 16K LCD screen, the Jupiter 2 delivers an extremely high resolution for sharp contours, fine textures, and exceptionally smooth surfaces. Even complex geometries and the smallest details are rendered with precision. Large build volume for maximum freedom With a generous build volume of 302.4 x 161.89 x 300 mm, the printer is ideal for large individual models or the serial production of multiple components in a single run. This makes it a perfect choice for figures, jewellery design, prototypes, and functional components. Multi-point auto-levelling Integrated multi-point auto-levelling ensures reliable and precise calibration at the start of every print. Manual fine-tuning is also available to make individual adjustments as needed. Maintenance-friendly design The modular design means the LCD screen can be quickly replaced without damaging it. Maintenance tasks can be completed in a matter of minutes, ensuring downtime is kept to a minimum. Fast film replacement Replacing the release film is particularly efficient. The process is up to 10 times faster than with standard systems. Intelligent resin management The integrated Smart Resin Management System monitors the resin level, refills it automatically, and recovers excess material. This allows you to focus on the printing process rather than material monitoring. Technical specifications: Printer Dimensions 465 x 508.10 x 648.1 mm Build Volume 302.4 x 161.98 x 300 mm Technology MSLA LCD 14-inch 16K LCD Print Speed max. 70 mm/h XY Resolution 20 x 26 µm (15120 x 6230 pixels) Z-axis Accuracy 0.02 mm Light Source COB light source + Fresnel collimating lens Operating System Linux EL3D-4.0 Recommended Slicer Elegoo SatelLite Slicer Device Display 4-inch capacitive touchscreen Interfaces USB, WiFi Camera Built-in, 1280 x 720 px Power 100-240 V, 50/60 Hz, 24 V 12.5 A

Bambu Lab X2D

2026-04-14T22:00:00+00:00

The Bambu Lab X2D 3D printer represents the next evolutionary stage of the Bambu Lab X-series, specifically engineered for precision multi-material 3D printing with dedicated support structures. Featuring a dual-extruder system, an actively heated enclosed build chamber, and intelligent sensor technology, the X2D is designed for users aiming to produce high-quality functional components, complex geometries, and clean support interfaces. Dual-Extruder System with Mechanical Nozzle Switching At the heart of the system is a dual-nozzle setup featuring a mechanical switching mechanism that operates without an auxiliary motor in the toolhead. Instead, a gear-and-ratchet mechanism handles the nozzle swap, reducing toolhead mass and minimising vibrations at high speeds. The combination of two extrusion systems is specially designed for maximum efficiency: Direct Drive (left nozzle): Short filament path for precision model printing. Bowden (right nozzle): Optimised for support materials. This architecture enables simultaneous printing of model and support using different materials, resulting in superior surface finishes and cleanly removable supports. Furthermore, the X2D's dual-extrusion system significantly reduces overall filament waste. Tip: The Bambu Lab X2D supports all common support material combinations. For example, PLA can be combined with PETG or PVA supports, while PETG can be used with PLA, or TPU with PLA. For technical materials such as PA6-CF or PET-CF, ABS or ASA can be utilised as support materials. Dynamic Flow Calibration for Consistent Print Quality The Bambu Lab X2D automatically manages key calibration and monitoring processes (extruder, hotend, nozzle, and filament). Before every print, the system performs a self-calibration and monitors the entire process via a vast array of sensors. A high-precision proprietary PMSM motor captures 20,000 data points per second, allowing it to detect deviations and potential clogs early on. If potential errors are identified, the printing process is paused before quality issues can occur. Heated Build Chamber for Technical Materials The fully enclosed design with active chamber heating up to 65 °C enables reliable printing of engineering-grade materials such as ABS, ASA, or Nylon, while "Cool Mode" provides optimal conditions for PLA and standard filaments. With a maximum nozzle temperature of up to 300 °C, the X2D covers a broad spectrum of materials. Two thermal modes for the build chamber: Cool Mode: Active cooling via external airflow for heat dissipation; optimal for standard materials such as PLA and PETG. Heat Mode: Actively heated build chamber up to 65 °C with nozzle temperatures up to 300 °C; suitable for technical materials such as ABS, ASA, or Nylon. Precision, Stability, and Quiet Operation Up to 31 integrated sensors ensure that the entire printing process is monitored - from material flow and temperature to safety-critical parameters. *The Vision Encoder is available separately as an option. This monitors belt tension and mechanical deviations continuously and compensates for them in real-time. This maintains a motion accuracy of up to 50 µm across the entire build volume. Optimised for Professional Support Workflows The X2D is specifically designed for model-and-support combinations. While traditional dual-material printing is possible, the system architecture reaches its full potential when combining materials for printing the model with dedicated support materials. Bambu Lab X2D 3D Printer Features at a Glance: Dual-extruder 3D printer with both Direct Drive and Bowden systems. Build volume (Single Nozzle): 256 x 256 x 260 mm. Build volume (Dual Nozzle): 235.5 x 256 x 256 mm. Dual Printheads: Direct Drive for model materials, Bowden for support material. Mechanical dual-nozzle switching mechanism without an auxiliary motor. Tool-free "Quick-Swap" nozzle replacement. Reduced mass for higher print speeds and stability. Dynamic Flow Calibration with real-time monitoring. AI monitoring of the build plate. Auto Hole and Contour Compensation. Optimised for professional support material printing. Enclosed, actively heated build chamber up to 65 °C. Compatible with PLA, PETG, ABS, ASA, Nylon, and more. 3-stage air filtration: G3 Pre-filter + H12 HEPA filter + Activated Carbon for reduced odours and VOCs. Quiet operation; under 50 dB in Silent Mode. Fully integrated into the Bambu Lab ecosystem (Bambu Studio, Bambu Handy, MakerWorld, Maker's Supply, maker's Lab, etc.). Suitable for professional and technical applications. Technical specifications: Printer Dimensions 392 x 406 x 478 mm Net Weight 16.25 kg Build Volume Main Nozzle Printing: 256 x 256 x 260 mm Auxiliary Nozzle Printing: 235.5 x 256 x 256 mm Dual Nozzle Printing: 235.5 x 256 x 256 mm Total volume: 256 x 256 x 260 mm Hotend 0.4 mm nozzle made of hardened steel, with integrated filament cutter Extruder Direct Drive (Main - left) + Bowden (Auxiliary - right) Compatible Filament Diameter 1.75 mm Max. Printing Temperature 300 °C Max. Printing Speed 1000 mm/s max. print bed temperature 120 °C Max. Acceleration 20,000 mm/s² Max. Flow Rate 40 mm³/s Chamber Heating active, up to 65 °C Air Filtration G3 pre-filter + H12 HEPA filter + activated carbon Supported Build Plates Bambu Textured PEI Plate, Bambu Cool Plate, Bambu Engineering Plate, Bambu High Temperature Plate, Bambu Smooth PEI Main Control Board Fan Closed Loop Chamber Heat Circulation Fan Auxiliary Part Cooling Fan Part Cooling Fan Hotend Fan External Exhaust Fan Supported Materials PLA (except PLA Aero), PETG, ABS, ASA, TPU for AMS, support for PLA, support for PLA/PETG, support for ABS, support for PA/PET, PET, PA, PC, PVA, glass-fibre and carbon-filled PLA, PETG, ABS, ASA, PA6, PAHT, PET Chamber Camera 1920 x 1080 pixels Device Display 5-inch touchscreen, 1280 x 720 pixels Control Interface Touchscreen, mobile app, PC Connectivity WiFi Storage 8 GB EMMC, USB port Voltage High-voltage version: 200-240 VAC, 50/60 Hz Low-voltage version: 100-120 VAC, 50/60 Hz Max. Power High-voltage version: 1600 W @ 220 V Low voltage version: 1100 W @ 110 V Operating Temperature 10-30 °C Supported Operating Systems MacOS, Windows, Linux Supported Slicers Bambu Studio and third-party slicers that support G-Code (some functions may be limited)

Bambu Lab External Exhaust Fan Kit

2026-04-13T22:00:00+00:00

The Bambu Lab External Exhaust Fan Kit upgrades the P2S 3D printer with active external ventilation. While the P2S features an internal activated carbon filtration system as standard, this kit allows for the targeted extraction of air directly to the outside. This ensures that fumes and particles are removed from the chamber more efficiently - an essential feature when working with high-emission materials. Once installed, the system integrates seamlessly with the printer's control architecture. The P2S can automatically adjust its ventilation mode based on the loaded filament type. For complete control, settings can be adjusted manually at any time via the printer’s touchscreen, Bambu Studio, or the Bambu Handy app. A key advantage is the automated post-print air purification. For technical filaments that require a sealed chamber - such as ABS or PA - the "Purify Air After Printing" function can be toggled in the settings. Upon completion of a print, the P2S automatically switches to external exhaust mode to reliably clear any remaining fumes before you open the door. ► Please Note: If you are using a Bambu Lab P2S without an AMS system, an additional Buffer accessory is required to use the External Exhaust Fan Kit. In the Box: 1 x External Exhaust Fan 1 x External Exhaust Fan Circuit Board 1 x 6-Pin Cable 26 x BT2-5 Screws 3 x M3x6 Screws

Elegoo Canvas for Centauri Carbon

2026-04-30T22:00:00+00:00

With the Elegoo CANVAS, multi-colour printing finally comes full circle. Specifically developed for the Centauri Carbon, this system enables fully automated 4-colour printing in a workflow that feels surprisingly simple. At its core, four independently controlled motors precisely manage each filament. This results in clean colour gradients and seamless transitions without visible breaks or the need for extensive post-processing. At the same time, optimised feed paths ensure that colour changes occur with almost no delay. Furthermore, for added flexibility, CANVAS supports a wide range of materials such as PLA, ABS, ASA, PETG, or PC. Whether you are creating simple prints or technical components, you can choose your material freely without adjusting your setup. The system also handles the heavy lifting when it comes to configuration: RFID detection automatically reads compatible Elegoo filaments and applies the correct print settings immediately. This means you no longer have to configure anything manually. For long print jobs, the automatic filament refill function takes over. As soon as a spool is empty, the system seamlessly switches to the next one without interrupting your print. Simultaneously, integrated tangle detection ensures that problems are identified early. The system automatically pauses when necessary and keeps the filament neatly tensioned to avoid errors and material waste. Note: CANVAS is only compatible with Centauri Carbon. Centauri Carbon 2 is not compatible with CANVAS. Technical Specifications: Dimensions 168 x 68 x 95 mm Print speeds Recommended: 250 mm/s Max.: ≤ 500 mm/s Max. acceleration 20,000 mm/s² Power 7 W Voltage DC 24 V Features RFID Filament Detection Filament Tangle Detection Filament Auto-Refill OTA Upgrades Supported materials Ideal: PLA, PETG, ABS, ASA Possible: PC, PA, PET, fibre-filled composites Supported filament diameter 1.75 mm Supported spool sizes Width: 40-70 mm Inner diameter: 53-58 mm

Polymaker ASA Olive Brown

2026-04-23T22:00:00+00:00

Polymaker™ ASA is the successor to PolyLite ASA. The material and its properties remain unchanged. Please note that during the transition phase, you may still receive the original PolyLite ASA packaging. Polymaker™ ASA is a high-performance technical filament based on ASA, specifically designed as an advanced alternative to ABS. It stands out for its exceptional UV and weather resistance, making it the ideal choice for components intended for permanent outdoor use. Compared to ABS, ASA offers significantly better resistance to sunlight, moisture, and temperature fluctuations without sacrificing stable mechanical properties. Processing Polymaker™ ASA is similar to ABS: using an enclosed build chamber helps minimise warping and temperature variations, ensuring clean and reliable printing results. ► Key features of Polymaker™ ASA at a glance: High UV and weather resistance Ideal for outdoor applications and durable components Mechanical properties comparable to ABS Excellent stability and impact resistance Optimal for functional parts and housings Best results achieved in an enclosed build chamber

Polymaker PolyDryer™ Box XL

2026-04-30T22:00:00+00:00

The Polymaker PolyDryer™ Box XL is the perfect option for users looking to reliably store large filament spools in a dry environment and print directly from there. Designed for spools up to 3 kg, it combines a heavy-duty seal with practical features for a smooth workflow. Thanks to its high-quality airtight sealing, moisture is effectively kept out, even with the larger internal volume. This ensures your filaments remain in optimal condition at all times. Particularly practical: you can print directly from the closed box. The filament is guided out through integrated, sealed ports without compromising the dry environment inside. To ensure you always have full control, a hygrometer is integrated to display the current humidity level. Additionally, the included colour-changing silica gel (up to 110 g) provides a quick visual check of the moisture status. The box is specifically designed for large spools up to Ø300 x 118 mm (up to 3 kg), meaning fewer spool changes are necessary - ideal for long print jobs or use in print farms. Handling has also been optimised: an integrated handle, a design reinforced for heavy spools, and an improved locking system make it exceptionally convenient to use. Tip: As part of the PolyDryer™ system, the box can optionally be connected to the PolyDryer Dry Dock (NOT included) to expand it into an active drying unit. It supports filaments with 1.75 mm, 2.85 mm, and 3.00 mm diameters. To use it with the PolyDryer Dry Dock, you will need an adapter, which you can print yourself (ABS or ASA recommended). You can find the adapter here.

Creality CFS Lite

2026-04-23T22:00:00+00:00

The Creality CFS Lite is a compact filament management system that significantly simplifies 3D printing through automated processes. It supports multi-colour printing, automatic filament loading and unloading, as well as automatic material replenishment, allowing print jobs to be carried out with minimal manual intervention. Automated multi-colour printing with automatic filament supply The system enables the use of multiple filaments and handles material changes independently during printing. If a filament is used up during the print process, the CFS Lite automatically switches to another spool with identical material properties. This allows prints to continue without interruption. Note: One CFS Lite system is supported per printer. Supported materials The system is designed for standard materials such as PLA and PETG, as well as compatible variants like Creality PLA-CF and PETG-CF. The following are not recommended: Flexible filaments such as TPU or TPE Moisture-sensitive materials such as PVA Very hard or brittle filaments, as well as certain CF and GF reinforced materials from other manufacturers Spool compatibility Outer diameter: 197–202 mm Spool width: 42–68 mm

Creality PrintEase Kit

2026-04-23T22:00:00+00:00

The Creality PrintEase Kit contains a selection of frequently required spare parts and regular wear-and-tear components. This kit was specifically put together to facilitate rapid repairs and routine servicing so you can fix issues the moment they arise. Carefully compiled to take the stress out of repairs, the kit includes the most important parts you'll need to fix your printer to get it back up and running quickly. With all the critical parts in one place, you can minimise downtime and keep your printer running at peak efficiency. Included in delivery: 1 x Hotend (0.2 mm) 2 x Hotend (0.4 mm) 1 x Hotend (0.6 mm) 1 x Hotend (0.8 mm) 5 x Filament cutters 5 x Nozzle wiping strips 3 x Silicone socks 1 x Extrusion assembly 1 x Hotend heating assembly 1 x Extruder gear assembly 1 x Purge wiper Set of screws

Polymaker Panchroma™ PLA Matte Pastel Beige

2026-04-30T22:00:00+00:00

Polymaker Panchroma™ PLA Matte is the successor to PolyTerra™ PLA. The material composition and properties remain unchanged. Transform your 3D prints into true works of art with Panchroma™ Matte PLA from Polymaker! This high-quality filament features a stunning matte finish that presents your models in a completely new light. The smooth texture provides a sophisticated look, while the filament simultaneously impresses with outstanding print quality, speed, and ease of use. The matte finish cleverly conceals layer lines, ensuring particularly smooth and aesthetically pleasing results.

Polymaker Panchroma™ PLA Matte Wine Burgundy

2026-04-30T22:00:00+00:00

Polymaker Panchroma™ PLA Matte Muted Mauve

2026-04-30T22:00:00+00:00

presto Filler

2026-04-23T22:00:00+00:00

presto Styrene-Free Body Filler is a versatile two-component polyester filling and drawing putty, ideal for levelling unevenness, filling holes, and skim-coating pre-treated surfaces. The specialised combination of highly reactive polyester resin and mineral fillers ensures reliable processing and stable results. The filler adheres securely to metal, wood, and concrete, making it suitable for a wide range of applications—from bodywork repairs and restoration to DIY projects. It can also be used efficiently for setting wall plugs and screws or repairing damaged surfaces. ► Application Recommendation: The surface must be clean, dry, free of grease, and sanded; any rust must be removed beforehand. Thoroughly mix the required amount of filler with the correct amount of hardener and apply in the desired layer thickness. After approximately 30–40 minutes, the surface can be further processed, e.g., by sanding, drilling, sawing, or painting. Tools should be cleaned immediately after use; mixed material must not be returned to the tin. Note: Small pitted areas (< 12 mm) should be filled with glass fibre filler first, while larger damage should be properly prepped beforehand.

Polymaker Panchroma™ PLA Matte Emerald Green

2026-04-30T22:00:00+00:00

Revopoint Electric Large Turntable

2026-04-30T22:00:00+00:00

The Revopoint Electric Large Turntable is a motorised turntable specifically developed for use in 3D scanning. It enables smooth and automated rotation of objects, making scans more efficient and results more reproducible. The electric rotational movement ensures stable and consistent positioning of the object, which improves data acquisition and reduces errors caused by manual handling. Due to its size, the turntable is particularly suitable for larger and heavier scan objects that cannot be easily moved by hand. In combination with compatible 3D scanners, the turntable enables automated scanning workflows where the object is rotated continuously. The turntable can be easily integrated into existing scanning setups and supports an efficient workflow for 3D data capture. Included in the delivery: 1 x Electric Large Turntable 1 x Remote control 1 x Power cable 1 x USB Type-A to USB Type-B cable Technical Specifications: Dimensions 500 x 67 mm Weight 7500 g Speed 28-88 s/rotation Control method Remote control / App Max. scan object weight 75 kg Power output 15 V 2 A

Polymaker Panchroma™ PLA Matte Muted Terracotta

2026-04-30T22:00:00+00:00

Revopoint High Visibility Marker

2026-04-30T22:00:00+00:00

The Revopoint High Visibility Markers are specifically developed reference points for 3D scanners that enable reliable object detection and stable scanning results. They improve the scanner's orientation and ensure precise data acquisition, particularly on challenging surfaces. These high-visibility markers provide superior detection for optical systems, making tracking significantly more stable and allowing the scanner to capture smooth, monochrome, or featureless objects without difficulty. By placing the markers evenly, movements can be tracked exactly, and alignment errors are minimised. The markers can be quickly applied to surfaces and removed when necessary, allowing them to be flexibly integrated into various scanning workflows. ► Inner diameter: 10 mm, Outer diameter: 13 mm

Alveo3D HEPA 13 Filter

2026-04-28T22:00:00+00:00

The Alveo3D HEPA13 Filter is specifically developed for use in FDM and resin 3D printing, ensuring effective air purification during the printing process. By combining multiple filtration stages, it reliably removes both coarse and fine particles from the air. An integrated G4 pre-filter captures larger particles and dust at an early stage, protecting the subsequent filter levels. The HEPA H13 Filter removes the finest particles generated during printing, while the activated carbon layer reduces typical emissions and odours. Included in the delivery: FE150 FE350 G4 Pre-Filter HEPA 13 Filter G4 Pre-Filter HEPA 13 Filter 2-layer Activated Carbon

Polymaker Panchroma™ PLA Matte Pastel Coral

2026-04-30T22:00:00+00:00

Alveo3D HEPA 14 Filter

2026-04-28T22:00:00+00:00

The Alveo3D HEPA 14 Filter provides high-performance filtration for demanding 3D printing environments. It removes ultrafine particles even more efficiently than the HEPA 13, and is specifically designed for applications involving fine dust, vapours, and nanoparticles. This makes the filter ideal for environments with heightened air quality requirements in both FDM and resin 3D printing. Included in the delivery: FE150 FE350 G4 Pre-Filter HEPA 14 Filter G4 Pre-Filter HEPA 14 Filter 2-layer Activated Carbon

Revopoint Magnetic Anchor Block

2026-04-30T22:00:00+00:00

The Revopoint Magnetic Anchor Block is designed for stable fixation of reference points or objects during 3D scanning. Its magnetic base allows it to be securely attached to metallic surfaces, ensuring reliable stability throughout the scanning process. The strong magnetic connection provides a firm hold without slipping, greatly enhancing scanning accuracy. Technical Specifications: Dimensions 42 x 44 mm Number of blocks 8 pieces Marker size Inner diameter: 10 mm Outer diameter: 13 mm Magnet size Ø 12 mm, thickness: 3 mm

Extrudr PCTG hellfire rot

2026-04-30T22:00:00+00:00

PCTG from Extrudr is a scratch-resistant filament with a glass-like appearance, characterised by high chemical and thermal resistance as well as exceptional mechanical properties. Despite being flexible, PCTG possesses good stiffness and excellent impact resistance. Furthermore, this PCTG features flame-retardant properties according to UL94 V2 and HB, and complies with certifications such as Cosmetic, FDA, REACH, and RoHS. As a modified copolyester, PCTG is ideally suited for industrial applications. Its heat deflection temperature of 80 to 90 °C makes it particularly interesting for the production of everything from electronic components to kitchen utensils. The material is easy to process and therefore suitable for beginners. Tip: Layer adhesion is excellent with sufficient heat and low cooling.

Polymaker Panchroma™ PLA Matte Muted Teal

2026-04-30T22:00:00+00:00

Polymaker Panchroma™ PLA Matte Seafoam Green

2026-04-30T22:00:00+00:00

Polymaker Panchroma™ PLA Matte Grass Green

2026-04-30T22:00:00+00:00

Revopoint Accuracy Verification Ball Plate

2026-04-30T22:00:00+00:00

The Revopoint Accuracy Verification Ball Plate is used for precise testing and validation of the measurement accuracy of Revopoint (and other) 3D scanners. It enables a quick check of scanner performance directly in the working environment and is particularly suitable for quality-critical applications. How does the Accuracy Verification Ball Plate work? The ball plate is scanned and compared with stored reference data. This allows deviations in volumetric accuracy to be reliably detected and evaluated. The integrated spherical structures serve as defined measuring points and enable an exact analysis of the scan precision across the entire working area. It is easy to use and can be seamlessly integrated into existing scanning and measurement processes. ► Ideal for quality assurance, reverse engineering, and industrial measurement tasks where reproducible and verifiable results are crucial. Key features of the Revopoint Accuracy Verification Ball Plate at a glance: Calibration plate for checking the accuracy of 3D scanners Compares scan data with reference geometry Detects deviations and measurement errors Precise spherical structure for exact measuring points Quick integration into existing workflows Suitable for quality assurance and industrial applications Technical Specifications: Dimensions 190 x 90 x 60 mm Material Carbon fibre Sphere surface Matte finish Sphere diameter 25.4 mm Sphere centre-to-centre distance 97 mm Compatibility All 3D scanners

Polymaker Panchroma™ PLA Matte Raspberry Blue

2026-04-30T22:00:00+00:00

Revopoint Laser Safety Glasses

2026-04-30T22:00:00+00:00

The Revopoint Laser Safety Glasses are specially designed for use with laser-based 3D scanners, providing reliable eye protection in the wavelength range of 200 to 460 nm. They effectively shield the eyes from laser radiation in the UV and blue light spectrum, commonly used in many modern 3D scanning processes. These safety glasses reduce the intensity of laser beams within the relevant spectral range, minimising the risk of eye damage caused by direct or reflected radiation. The ergonomic design and low weight ensure a comfortable and stable fit when worn. Included in delivery: 1 x Laser safety glasses 1 x Protective case 1 x Cleaning cloth Technical Specifications: Dimensions 155 x 50 mm Weight 35 g Lens thickness 2 mm Temple length 125 mm For wavelength range 200–460 nm Visible light transmission < 70 % Protection type Absorption + Reflection Optical density OD5

Polymaker Panchroma™ PLA Matte Sunshine Yellow

2026-04-30T22:00:00+00:00

Revopoint Scanner PC Cable

2026-04-30T22:00:00+00:00

The Revopoint Scanner PC Cable is designed for a direct connection between your Revopoint 3D scanner and a PC, enabling reliable data transfer and a stable power supply during the scanning process. The wired connection ensures consistent performance without signal interruptions. At the same time, the cable provides low latency, which is particularly beneficial for real-time feedback and detailed data acquisition. Tip: Specifically designed for Revopoint scanners, ensures a stable wired connection, making it the ideal choice for demanding, long-duration scans. ► Length: 3 m

presto Glass Fibre Filler

2026-04-23T22:00:00+00:00

presto Styrene-Free Glass Fibre Filler is a two-component polyester filler containing glass fibre particles, specifically developed for repairing larger damaged areas and rust-through holes. The combination of unsaturated polyester resin, glass fibres, and an integrated adhesion promoter (NT) creates a particularly stable and resilient bond. This filler is ideal for bridging perforations, stabilising weakened areas, and levelling out larger uneven surfaces. It can be used on metal, wood, concrete, and many plastics, and is especially suitable for areas subject to mechanical stress, tension, or expansion forces. ► Application Recommendation: The surface must be clean, dry, free of grease, sanded, and cleared of rust. Thoroughly mix the required amount of filler with the correct amount of hardener and apply in the desired layer thickness. After approximately 30–40 minutes, the surface can be further processed—for example, by sanding, drilling, or painting. For a particularly smooth finish, it is recommended to level the area afterwards using a filler or fine filler. Note: For larger rust holes (> 12 mm), appropriate pretreatment, such as with polyester resin, should be carried out beforehand. Technical Specifications: Base Polyester resin with mineral fillers and glass fibre particles Colour Grey-green Form Pasty, soft, thixotropic Working time (20 °C) Approx. 7–8 min Processing temperature From 12 °C Drying (20 °C, 50% relative humidity) Sandable after approx. 30–40 min Flashpoint Approx. 33 °C Density (20 °C) 1.46 g/cm³ Hardener addition 2-4 % Temperature resistance of cured material 120 °C

eSUN eSpool+ 2.0

2026-04-23T22:00:00+00:00

The eSUN eSpool+ 2.0 is an advanced, modular, and reusable spool system for refillable filaments without a disposable spool. It is compatible with eSUN filaments as well as many common 1000g filaments and was specifically designed for more efficient use in everyday 3D printing. Compared to the first generation, the eSpool+ 2.0 offers improved handling during assembly and disassembly. The optimised rotary mechanism design ensures easier, faster, and more comfortable handling in daily use. Made from robust ABS, the spool impresses with its high stability and durability and is ideal for repeated use with refill filaments. Internal dimensions: Diameter → 200 mm Width → 65 mm Thickness → 3.5 mm

presto Fine Filler

2026-04-23T22:00:00+00:00

presto Fine Filler is a highly elastic, two-component polyester finishing putty for the precision repair of minor imperfections and for fine filling work on pre-treated surfaces. Due to the styrene-free formulation and the use of micro-fine fillers, it creates an exceptionally smooth and even surface that is ideal for subsequent painting. The filler adheres reliably to metal, wood, concrete, and pre-filled substrates and is easy to apply. Thanks to its excellent sandability and stable material properties, it is suitable for applications in the automotive sector, mechanical engineering, as well as workshop and hobby projects. ► Application Recommendation: The surface must be clean, dry, free of grease, and sanded; any rust must be removed beforehand. Thoroughly mix the required amount of filler with the correct amount of hardener and apply evenly. After approximately 30–40 minutes, the treated surface can be further processed, e.g., by sanding, drilling, or painting. Tools should be cleaned immediately after use. Application is possible from a minimum temperature of 5 °C; ideally, the material should be at room temperature. Galvanised surfaces must be treated with a suitable zinc primer beforehand. Technical Specifications: Base Polyester resin with a pigment-filler combination Colour White Form Pasty, soft, thixotropic Working time (20 °C) Approx. 7-8 min Processing temperature From 12 °C Drying (20 °C, 50% relative humidity) Sandable after approx. 30-40 min Flashpoint Approx. 33 °C Density (20 °C) 1.7 g/cm³ Hardener addition 2-4 % Temperature resistance of cured material 120 °C

Creality Toolhead Board

2026-04-23T22:00:00+00:00

This is a replacement Toolhead Board for Creality 3D printers.

Creality Main Control Board

2026-04-23T22:00:00+00:00

This is a replacement Main Control Board for Creality 3D printers.

Creality Purge Wiper

2026-04-23T22:00:00+00:00

This is a replacement Purge Wiper for Creality 3D printers.

Creality Extruder Motor Cooling Assembly

2026-04-23T22:00:00+00:00

This is an Extruder Motor Cooling Assembly for Creality 3D printers.

presto Brush Cleaner

2026-04-23T22:00:00+00:00

presto Brush Cleaner is a high-performance cleaner for the thorough removal of paint contamination as well as oily and greasy residues. It is ideal for cleaning brushes, paint rollers, and lacquering tools, ensuring they are quickly and reliably ready for reuse. The cleaner can also be used for cleaning machinery and engines, making it highly versatile for use in workshops and industrial environments. ► Directions for use: Painting tools should be dipped into or moistened with presto Brush Cleaner immediately after use and then cleaned with a clean cloth. Smaller machine parts can be fully immersed, while larger surfaces should be sprayed and left to soak for 5–20 minutes before being wiped off. After cleaning, it is recommended to lightly oil bare metal parts to prevent corrosion. Caution is advised when using on painted surfaces and plastics. Technical Specifications: Colour Transparent Flashpoint ~ 47 °C Density 0.85 g/cm³